e4fa961ef0
succd: Only show voltage on hover
...
/ test (push) Successful in 10s
/ test (pull_request) Successful in 10s
Another HP HMI thing: "Only show information that is immediately
relevant". Let's hide the pirani voltage as it is mostly no longer
interesting to the user. For situations where it is, it can be revealed
by hovering over the pirani pressure value.
2024-10-05 02:53:16 +02:00
314dd72aa6
succd: Optimize color usage for HP HMI
...
In the process automation world, there is a trend to move away from
colorful user-interfaces, towards more "boring" colorschemes. The
argument is about situational awareness - by only using colors to
highlight abnormal situations, they become instantly recognizable to the
operators.
This design philosophy is outlined by the ISA-101 [1] under the name
"High Performance HMI". While it covers much more than just colors, I
think this is the most important part and the one that is most
applicable for our usecase.
So let's do a bit of HP HMI - reduce colors usage such that only
important information is highlighted.
[1]: https://www.isa.org/standards-and-publications/isa-standards/isa-standards-committees/isa101
2024-10-05 02:52:51 +02:00
276551064f
succd: Fix mobile layout
...
Use smaller font sizes for mobile devices so the full interface fits on
a single screen (mostly).
2024-10-05 02:52:48 +02:00
4f74e92c45
succd: Fix layout on large screens
...
Make sure the grid cannot grow too large on big screens. Also slightly
adjust the breakpoint to avoid some weird artifacts.
2024-10-05 02:40:20 +02:00
e2fc15ed9b
succd: Use tigher hysteresis values
...
/ test (pull_request) Successful in 10s
/ test (push) Successful in 10s
It seems we can get away with less hysteresis still. Make the values a
bit smaller.
2024-10-04 23:30:28 +02:00
ef959f4be3
succd: Configure hysteresis for rough and high thresholds
...
Add CLI flags for rough and high hysteresis and configure default values
based on experiments.
2024-10-04 23:30:28 +02:00
8645718748
succd: Add hysteresis feature to thresholdOutput blocks
...
Add a hysteresis value that can be optionally configured for
thresholdOutput blocks. This will hopefully help to prevent jumping
outputs from feedback that is caused by the thresholdOutput itself.
2024-10-04 23:30:28 +02:00
ed8adad611
succd: Fix table jiggle
...
Make sure the table size doesn't dynamically jiggle with movement of
width changes of the load-average value.
2024-10-04 23:30:28 +02:00
313569e1dc
succd: Use grid layout to show all info on a single screen
...
Use CSS grids to all information on a single screen if possible. There
is a breakpoint for smaller screens.
2024-10-04 23:30:28 +02:00
102393a689
succbone: Update title pic
/ test (pull_request) Successful in 3s
/ test (push) Successful in 3s
2024-09-28 23:35:09 +02:00
2899677059
succd: add info on how to run tests
/ test (pull_request) Successful in 4s
/ test (push) Successful in 4s
2024-09-28 16:13:10 +02:00
2454a44350
succd: add ci, tests
/ test (push) Successful in 4s
2024-09-28 16:09:07 +02:00
96e07ece2d
succd: run at 100Hz, monitor load and jitter
2024-09-28 14:27:43 +02:00
12f6815673
succd: gofmt
2024-09-28 14:27:43 +02:00
zdmx
f5d80a335f
succd: remove redundant if
2024-09-28 11:20:25 +02:00
fbf41203de
succd: do not engage pirani failsafe on startup, as that prohibits restarting succd when the machine runs
2024-09-28 10:23:15 +02:00
dda098f634
succd: early refuse unsafe operations
2024-09-28 10:22:40 +02:00
960be9cd23
succd: rewrite processing loop
2024-09-28 10:17:05 +02:00
3d81a1f56c
succd: roll process_state.go back into process.go
2024-09-28 09:48:50 +02:00
185525ca30
succd: downgrade high pressure lockout message to warning
2024-09-28 09:46:49 +02:00
590e93e43e
succd: log pressures in error messages
2024-09-28 09:46:18 +02:00
451b44e31b
succd: move out processing blocks to separate file
2024-09-28 09:39:44 +02:00
4df00f0a63
succd: factor out ringbuffer, do not recalculate average on every request
2024-09-28 09:35:41 +02:00
42c9ae2fa7
succd: httpServer -> webServer
2024-09-28 09:19:14 +02:00
f66afc0c8f
succd: restyle slightly
2024-09-28 08:32:07 +02:00
8f7ec7e141
succd: split out http server, daemon state, daemon controller
...
This improves the structure of the code, separating the data/control
interface out and then implementing the http interface as a user of this
interface.
2024-09-28 08:10:35 +02:00
3ec6fd1d1b
succd: unify html/js data source
2024-09-28 07:54:18 +02:00
776f7a9911
succd: add hysteresis for high pressure safety interlock
2024-09-28 07:36:37 +02:00
239a5c40cc
succd: factor out safety status to separate struct
2024-09-28 07:36:37 +02:00
80f482b732
succd: tristate pirani safety detection
2024-09-28 07:31:06 +02:00
85d2afbdd0
succd: Fix javascript and template syntax errors
...
Turns out the go templating engine fails silently when unclosed strings
are present in the templated file.........
Fix javascript code :))
2024-09-28 00:05:18 +02:00
zdmx
908727608a
succd: add safety status to web frontend
2024-09-27 23:49:24 +02:00
zdmx
eb7707f1a0
succd: change safety reset threshold
2024-09-27 23:35:44 +02:00
zdmx
ae9ac4ea0e
succd: reset failsafe only after vent
2024-09-27 23:33:03 +02:00
93ca80706f
succbone: panel: Wire fake-pirani signals to NC contacts
...
Pirani thresholds are signalled by breaking the connection so let's wire
this up correctly.
2024-09-27 23:25:11 +02:00
zdmx
7a64ce91d4
succd: check currentmost pirani values for safety lock
2024-09-27 23:24:55 +02:00
zdmx
9db2213fa6
succd: log rate of change
2024-09-27 23:06:56 +02:00
zdmx
9ad6ce7dad
succd: calcuate change rate for safety interlock directly from adc ringbuffer
2024-09-27 23:02:21 +02:00
zdmx
d3391b28ec
succd: add additional safety interlocks
2024-09-27 22:29:56 +02:00
f7752922c2
succd: Cleanup whitespace in HTML file
2024-09-27 02:32:36 +02:00
34ab508b13
succd: add pirani failsafe
2024-09-27 02:24:19 +02:00
6d97eb62a8
succd: implement threshold outputs, rework processing
2024-09-27 02:12:38 +02:00
781bbaaeb4
succd: show logo
2024-09-27 02:12:38 +02:00
7dffd2a4b4
succd: add logo
2024-09-27 02:12:38 +02:00
0eacd74484
succd: README: add pin table
2024-09-27 02:12:38 +02:00
ed56aabfb1
succbone: panel: Update drawings
2024-09-27 02:01:24 +02:00
efbe9d6b53
succbone: Add relay board mount
...
This mount is vertical to save some space on the panel
2024-09-27 01:19:56 +02:00
1e6b817730
Track .stl files in git-lfs
2024-09-27 01:19:15 +02:00
45eab4938b
Add a README
2024-09-26 19:14:22 +02:00
dc21da8158
succbone: panel: Add pirani gauge and ethernet connection
2024-09-26 02:35:23 +02:00
