succd

A little daemon for monitoring the SEM. This is a temporary solution that runs on a BeagleBone Enhanced (succbone.lab) and SHOULD be replaced with a proper PLC/SCADA system and general process control in the future.

Features:

Monitors the state of the Pirani gauge via the BBE's builtin ADC.
Allows enabling/disabling the diffusion/roughing pumps (builtin controller always keeps them enabled).
Allows for simulating vent/pumpdown button presses.

Pins

P9 pin number	Relay number	Relay board / channel number	GPIO number	Function
27	-KFA1	1 / 4	115	Roughing Pump
23	-KFA2	1 / 3	49	Diffusion Pump
n/c	-KFA3 (broken)	1 / 2	n/c
12	-KFA4	1 / 1	60	Vent Button
15	-KFA5	2 / 4	48	Pump Down Button
11	-KFA6	2 / 3	30	Rough Vacuum Out
42	-KFA7	2 / 2	7	High Vacuum Out
n/c	-KFA8	2 / 1	n/c

Accessing at the lab

Go to succbone.lab.fa-fo.de.

Known issues

Sometimes the websocket doesn't connect. Refreshing the page a few times should fix it.

Running locally

$ ./ci.sh # run tests
$ go run . -fake

Then point your browser to localhost:8080

Deploying on the succbone

$ ssh root@succbone systemctl stop succd
$ GOARCH=arm go build .
$ scp succd root@succbone:/usr/bin/succd
$ ssh root@succbone systemctl start succd

1.9 KiB Raw Blame History