Illumination module fixes, report as module

src/main.cpp

@@ -137,6 +137,9 @@ void get_modules(String)
     comPort->print(" soft");
     #endif
     comPort->println();
+#endif
+#if defined(ILLUMINATION)
+    comPort->println("Illumination:default");
 #endif
     comPort->println("--END--");
 }

src/modules/illumination/illumination.cpp

@@ -8,31 +8,80 @@
     #include "dummyEEPROM.h"
 #endif
 
+const uint16_t eeprom_offset = 100;
+
 const uint8_t pwm_led_pins[] = WIRING_PWM_LEDS;
+const uint16_t cc_value_eeprom = eeprom_offset;
+const uint16_t pwm_frequency_eeprom = cc_value_eeprom + sizeof(uint8_t);
+const uint16_t pwm_values_eeprom = pwm_frequency_eeprom + sizeof(uint16_t);
+
+uint32_t pwm_frequency;
+uint8_t cc_value;
+
+uint16_t pwm_values[PWM_NUM];
+
+
 void illumination_pwm_freq(String command)
 {
     char * args[1];
-    parse_arguments(args, command, 1);
+    uint8_t parsed = parse_arguments(args, command, 1);
     #ifdef MCU_PICO
-        analogWriteFreq(atol(args[0]));//32khz seems sensible
+        if (parsed > 0 && !(args[0] == "" || args[0][0] == '?'))
+        {
+            pwm_frequency = atol(args[0]);
+            EEPROM.put(pwm_frequency_eeprom, pwm_frequency);
+            analogWriteFreq(pwm_frequency);
             analogWriteRange(65535);
+        }
 
-        comPort->print("Frequency set: ");
+        comPort->print("PWM Frequency:");
-        comPort->print(atol(args[0]));
+        comPort->print(pwm_frequency);
         comPort->println("Hz");
     #else
         comPort->println("Feature not supported");
     #endif
 
+    if (parsed > 0)
         free(args[0]);
 }
 
+void illumination_channels(String command)
+{
+    comPort->print("CC:");
+    #ifdef WIRING_CC_LED
+        comPort->print(1);
+    #else
+        comPort->print(0);
+    #endif
+    comPort->print(" PWM:");
+    comPort->println(PWM_NUM);
+}
+
 void illumination_pwm(String command)
 {
     #ifdef MCU_PICO
     //PWM frequency is shared between both PWM outputs
     char * args[2];
-    parse_arguments(args, command, 2);
+    uint8_t parsed = parse_arguments(args, command, 2);
+    if (parsed > 0 && args[0][0] == '?')
+    {
+        comPort->print("PWM:");
+        for(int i=0; i<PWM_NUM; i++)
+        {
+            #ifdef MCU_PICO
+                comPort->print(pwm_values[i]/65535.0);
+            #else
+                comPort->print(pwm_values[i]/255.0);
+            #endif
+            comPort->print(";");
+        }
+        comPort->println("");
+        free(args[0]);
+        if (parsed == 2)
+            free(args[1]);
+
+        return;
+    }
     uint8_t index = atoi(args[0]);
     if (index >= PWM_NUM)
     {
@@ -45,26 +94,28 @@ void illumination_pwm(String command)
         digitalWrite(pwm_led_pins[index], LOW);
     }
     #ifdef MCU_PICO
-        uint32_t pwm_val = val * 65535;
+        uint16_t pwm_val = val * 65535;
     #else
         uint8_t pwm_val = val * 255;
     #endif
 
     analogWrite(pwm_led_pins[index], pwm_val);
-    comPort->print("Illumination set");
+    pwm_values[index] = pwm_val;
+    EEPROM.put(pwm_values_eeprom+index*sizeof(uint16_t), pwm_val);
+    comPort->print("PWM:");
+    comPort->print(index);
+    comPort->print(":");
     comPort->println(pwm_val);
 
+    if (parsed > 0)
         free(args[0]);
+    if (parsed > 1)
         free(args[1]);
     #endif
 }
 
 void illumination_setup()
 {
-    #ifdef MCU_PICO
-        analogWriteRange(65535);
-        analogWriteFreq(32000);//32khz seems sensible
-    #endif
     for (uint8_t i = 0; i < PWM_NUM; i++)
     {
         pinMode(pwm_led_pins[i], OUTPUT);
@@ -72,15 +123,31 @@ void illumination_setup()
     }
 
     #ifdef WIRING_CC_LED
+        EEPROM.get(cc_value_eeprom, cc_value);
         pinMode(WIRING_CC_LED, OUTPUT);
+        if (cc_value > 0)
+            cc_set_value(cc_value/32.0);
     #endif
 
+    #ifdef MCU_PICO
+        EEPROM.get(pwm_frequency_eeprom, pwm_frequency);
+        if (pwm_frequency < 1)
+            pwm_frequency = 64000;
+        analogWriteRange(65535);
+        analogWriteFreq(pwm_frequency);//32khz seems sensible
+    #endif
+
+    for(int i = 0; i < PWM_NUM; i++)
+    {
+        EEPROM.get(pwm_values_eeprom+i*sizeof(uint16_t), pwm_values[i]);
+        analogWrite(pwm_led_pins[i], pwm_values[i]);
+    }
+
     register_module(illumination_commands, NULL);
 }
 
 #ifdef WIRING_CC_LED
-
+//these functions are useful for testing
-//these functions are useful testing
 float multi_read(uint8_t pin, uint16_t reads)
 {
     float total = 0;
@@ -114,13 +181,19 @@ void cc_test()
 void cc_set(String command)
 {
     char * args[1];
-    parse_arguments(args, command, 1);
+    uint8_t parsed = parse_arguments(args, command, 1);
+    if (parsed > 0 && !(args[0] == "" || args[0][0] == '?'))
+    {
         float val = atof(args[0]);
-
-    free(args[0]);
         cc_set_value(val);
     }
 
+    comPort->print("CC LED:");
+    comPort->println(cc_value/32.0);
+    if (parsed > 0)
+        free(args[0]);
+}
+
 void cc_set_value(float val)
 {
     #ifdef WIRING_CC_LED
@@ -130,6 +203,9 @@ void cc_set_value(float val)
             return;
         }
 
+        cc_value = 32 * val;
+        EEPROM.put(cc_value_eeprom, cc_value);
+
         const uint8_t td = 3; // >= 1.5 us
         const uint8_t tup = 2; // 1-75 us
         const uint8_t tdown = 180; //180-300us
@@ -173,7 +249,8 @@ void cc_set_value(float val)
 
 extern const Command illumination_commands[] = {
     {"led_pwm", illumination_pwm},
-    {"led_freq", illumination_pwm_freq},
+    {"led_channels", illumination_channels},
-    {"led_cc_set", cc_set},
+    {"led_frequency", illumination_pwm_freq},
+    {"led_cc", cc_set},
     END_COMMAND};
 #endif

src/modules/illumination/illumination.h

@@ -7,6 +7,7 @@
 
 void illumination_pwm(String command);
 void illumination_pwm_freq(String command);
+void illumination_channels(String command);
 
 void cc_set(String command);
 void cc_set_value(float val);

test/test_argument_parsing.cpp

@@ -74,7 +74,7 @@ void setup() {
     Serial.begin(115200);
     // NOTE!!! Wait for >2 secs
     // if board doesn't support software reset via comPort->DTR/RTS
-    delay(2000);
+    delay(5000);
     UNITY_BEGIN();    // IMPORTANT LINE!
     //bizzare string issues caused this to fail in specific sequences, so we run it multiple times
     RUN_TEST(test_multiple_argument_parsing);