diff --git a/spinnyboy_rust/src/bin/dc_driver/dshot.rs b/spinnyboy_rust/src/bin/dc_driver/dshot.rs
new file mode 100644
index 0000000..24f85d8
--- /dev/null
+++ b/spinnyboy_rust/src/bin/dc_driver/dshot.rs
@@ -0,0 +1,205 @@
+// use embedded_hal_async::delay::DelayNs;
+use esp_hal::{
+    delay::Delay,
+    gpio::Level,
+    rmt::{PulseCode, Tx,Rx,TxChannelCreator,Channel},
+};
+use num_traits::float::FloatCore;
+
+#[allow(dead_code)]
+#[allow(non_camel_case_types)]
+#[derive(Debug)]
+pub enum DSHOT_TELEMETRY_CMD {
+    MOTOR_STOP = 0x0,
+    BEEP1 = 0x01,
+    BEEP2 = 0x02,
+    BEEP3 = 0x03,
+    BEEP4 = 0x04,
+    BEEP5 = 0x05,
+    ESC_INFO = 0x06,
+    SPIN_DIRECTION_1 = 0x07,
+    SPIN_DIRECTION_2 = 0x08,
+    MODE_3D_OFF = 0x09,
+    MODE_3D_ON = 0x0A,
+    SETTINGS_REQUEST = 0x0B,
+    SAVE_SETTINGS = 0x0C,
+    EXTENDED_TELEMETRY_ENABLE = 0x0D,
+    EXTENDED_TELEMETRY_DISABLE = 0x0E,
+}
+
+#[derive(Debug, Clone, Copy)]
+pub struct BitTicks {
+    t0_h: u16,
+    t0_l: u16,
+    t1_h: u16,
+    t1_l: u16,
+}
+
+impl BitTicks {
+    pub fn new(t1_h: u16, t0_h: u16) -> Self {
+        Self {
+            t0_h,
+            t1_h,
+            t0_l: t1_h,
+            t1_l: t0_h,
+        }
+    }
+
+    pub fn from_clk(clk_speed: u32, clk_divider: u8, bit_times: BitTimes) -> Self {
+        let tick_len = (1. / clk_speed as f32) * (clk_divider as f32) * 1_000_000.;
+
+        let t1_h = (bit_times.t1_h / tick_len).round() as u16;
+        let t0_h = (bit_times.t0_h / tick_len).round() as u16;
+
+        Self::new(t1_h, t0_h)
+    }
+}
+
+/// High and Low Times in µs
+#[derive(Debug, Clone, Copy)]
+pub struct BitTimes {
+    t0_h: f32,
+    t1_h: f32,
+}
+
+impl BitTimes {
+    pub fn new(t1_h: f32, t0_h: f32) -> Self {
+        Self { t0_h, t1_h }
+    }
+}
+
+#[derive(Debug, Clone, Copy)]
+pub enum DShotSpeed {
+    DShot150,
+    DShot300,
+    DShot600,
+    DShot1200,
+}
+
+impl DShotSpeed {
+    pub fn bit_period_ns(&self) -> u32 {
+        match self {
+            // 6.67µs per bit
+            Self::DShot150 => 6667,
+            // 3.33µs per bit
+            Self::DShot300 => 3333,
+            // 1.67µs per bit
+            Self::DShot600 => 1667,
+            // 0.83µs per bit
+            Self::DShot1200 => 833,
+        }
+    }
+
+    /// High and Low Times in µs
+    pub fn bit_times(&self) -> BitTimes {
+        match &self {
+            Self::DShot150 => BitTimes::new(5.00, 2.50),
+            Self::DShot300 => BitTimes::new(2.50, 1.25),
+            Self::DShot600 => BitTimes::new(1.25, 0.625),
+            Self::DShot1200 => BitTimes::new(0.625, 0.313),
+        }
+    }
+
+    /// These are for an 80 MHz clock with a clock divider setting of 1
+    pub fn default_bit_ticks(&self) -> BitTicks {
+        match &self {
+            Self::DShot150 => BitTicks::new(400, 200),
+            Self::DShot300 => BitTicks::new(200, 100),
+            Self::DShot600 => BitTicks::new(100, 50),
+            Self::DShot1200 => BitTicks::new(50, 25),
+        }
+    }
+}
+
+#[allow(dead_code)]
+#[derive(Debug, Clone)]
+pub struct DShot<'a> {
+    rx_channel:&'a Channel<'a,esp_hal::Blocking,esp_hal::rmt::Rx>,
+    tx_channel:&'a Channel<'a,esp_hal::Blocking,esp_hal::rmt::Tx>,
+    speed: DShotSpeed,
+    bit_ticks: BitTicks,
+}
+
+ 
+impl<'a> DShot<'a> {
+    pub fn new(
+        rx_channel:&'a Channel<'a,esp_hal::Blocking,esp_hal::rmt::Rx>,
+        tx_channel: &'a Channel<'a,esp_hal::Blocking,esp_hal::rmt::Tx>,
+        speed: DShotSpeed,
+        clk_speed: Option<u32>,
+        clk_divider: Option<u8>,
+    ) -> Self {
+        let clk_speed = clk_speed.unwrap_or(80_000_000);
+        let clk_divider = clk_divider.unwrap_or(1);
+
+        let bit_ticks = BitTicks::from_clk(clk_speed, clk_divider, speed.bit_times());
+        Self {
+           rx_channel: rx_channel,tx_channel: tx_channel,
+            speed,
+            bit_ticks,
+        }
+    }
+
+    pub fn calculate_crc(frame: u16) -> u16 {
+        (frame ^ (frame >> 4) ^ (frame >> 8)) & 0xF
+    }
+
+    pub fn create_frame(value: u16, telemetry: bool) -> u16 {
+        // Mask to 11 bits (0-2047 range) and set telemetry bit
+        let frame = ((value & 0x07FF) << 1) | telemetry as u16;
+
+        let crc = Self::calculate_crc(frame);
+
+        (frame << 4) | crc
+    }
+
+    #[allow(clippy::needless_range_loop)]
+    pub fn create_pulses(&mut self, throttle_value: u16, telemetry: bool) -> [u32; 17] {
+        let frame = Self::create_frame(throttle_value, telemetry);
+        let mut pulses = [0; 17];
+        for i in 0..16 {
+            let bit = (frame >> (15 - i)) & 1;
+
+            pulses[i] = if bit == 1 {
+                PulseCode::new(
+                    Level::High,
+                    self.bit_ticks.t1_h,
+                    Level::Low,
+                    self.bit_ticks.t1_l,
+                ).into()
+            } else {
+                PulseCode::new(
+                    Level::High,
+                    self.bit_ticks.t0_h,
+                    Level::Low,
+                    self.bit_ticks.t0_l,
+                ).into()
+            };
+        }
+
+        // Add empty pulse to end of pulses frame
+        pulses[16] = 0;
+        pulses
+    }
+
+    pub fn write_throttle(
+        &mut self,
+        throttle: u16,
+        telemetry: bool,
+    ) -> Result<(), &'static str> {
+        let pulses = self.create_pulses(throttle, telemetry);
+        self.channel
+            .transmit(&pulses)
+            .map_err(|_| "Failed to send frame")?;
+        Ok(())
+    }
+
+    pub fn arm(&mut self, delay: &mut Delay) -> Result<(), &'static str> {
+        for _ in 0..100 {
+            self.write_throttle(0, false)?;
+            delay.delay_millis(20);
+        }
+
+        Ok(())
+    }
+}
diff --git a/spinnyboy_rust/src/bin/dc_driver/mod.rs b/spinnyboy_rust/src/bin/dc_driver/mod.rs
index 5ebbfd5..40e125f 100644
--- a/spinnyboy_rust/src/bin/dc_driver/mod.rs
+++ b/spinnyboy_rust/src/bin/dc_driver/mod.rs
@@ -1,5 +1,5 @@
 pub mod afroesc;
-
+pub mod dshot;
 pub enum EscState {
     Starting,
     Running,