## STM Original Electronics
This directory contains the documentation of the original control electronics of the STM.  We did some modifications which are detailed below.

### Overview
![Block diagram of the STM](./STM-Functional-Overview.png)

The **Control Box** schematic can be found in [`STM_Main_neu_Schaltplan_3.pdf`](./STM_Main_neu_Schaltplan_3.pdf).

The **Preamplifier** schematic is [`STM_Vorverst_neu_2.pdf`](./STM_Vorverst_neu_2.pdf).

### Modifications

- Preamplifier
  - *[2025-06-14]* Added a 1nF capacitor parallel to `R10` to mitigate 12kHz
    oscillation and stabilize the amplifier.
- Control Box
  - *[2025-06-14]* Disconnected `R36` from `R1`/`C1` and instead connected it
    to -15V through a separate 10k resistor.  This inverts the setpoint
    voltage, which was necessary to make the differentiator actually calculate
    an error difference.  Previously, it was summing the setpoint and control
    variable...
  - *[2025-06-14]* Cut out `R8`, the resistor parallel to the capacitor of the
    integrator (I-controller).  This resistor was preventing the integrator
    from stably integrating at very low frequencies.
  - *[2025-06-15]* Added a 1µF capacitor parallel to `C7`.  This mitigates 1.47
    kHz oscillation when the amplifier gain is high.