be764cb7d3
temp: Add more temperature data
2025-08-24 21:40:43 +02:00
164f930b6b
temp: Toggle pico led as heatbeat
...
To show that the monitor is alive, blink the onboard LED of the pico.
2025-08-24 21:40:09 +02:00
78c85d3ffe
temp: Add first measurement results
2025-08-24 18:59:09 +02:00
5fa05aca2c
temp: Add license
2025-08-24 17:13:29 +02:00
40a2f9c5f3
temp: Add a README
2025-08-24 17:11:33 +02:00
4b75e4c651
temp: Add datasheets
2025-08-24 16:49:02 +02:00
10cea18d0a
temp: Use more sane substitute value
...
When the ADC saturates, use a substitute value that doesn't kill the
following math...
2025-08-24 16:08:51 +02:00
115eecde4f
temp: Don't exit on errors
...
Make the script slightly more robust by not stopping the monitoring when
an exception is raised.
2025-08-24 16:08:04 +02:00
37b58a1529
temp: Also plot last raw value
...
To sanity-check the filtered result, also plot the raw value alongside
it each time.
2025-08-24 04:07:31 +02:00
670576abf8
temp: Increase filter time
...
Increase the filter constant to 100s to smoothen the signal a lot. For
online viewing, this is quite nice, but for acquisition, we should
probably look at the raw data...
2025-08-24 03:35:41 +02:00
12753d93fb
temp: Slow down reports
...
Only send a new report every 200ms to hopefully mitigate the serial port
glitches.
2025-08-24 03:21:46 +02:00
f46e58b4e8
temp: Rename script
2025-08-24 03:12:43 +02:00
f481e4de38
temp: Actually calculate temperature values
...
Do the monster math to convert ADC readings into appropriate temperature
values. The absolute result is way off but it seems to respond sanely
in relative terms.
Additionally, apply a low pass filter with f=1Hz to smoothen the noise a
tiny bit.
2025-08-24 02:33:22 +02:00
25ce0ebdff
temp: Proper readout script
2025-08-24 01:18:51 +02:00
df8ae2263d
temp: First version of adc readout
2025-08-24 00:11:16 +02:00
6ae974ecaa
Add system model
2025-06-16 11:23:25 +02:00
